Common sense about batteries
Common sense about batteries
Normal charging
Different batteries have their own characteristics, and users must charge them according to the method indicated in the manufacturer's manual. In the standby state, the phone also consumes the battery. If fast charging is required, it is advisable to turn off the phone or remove the battery for charging.
fast charging
Some automated smart fast chargers only indicate that they are 90% full when the indicator signal changes, and the charger will automatically switch to slow charging to fully charge the battery. It is best for users to fully charge the battery before use, otherwise it will shorten the use time.
Memory effect
If the battery is a nickel-cadmium battery, if it is not fully charged or discharged for a long time, it will leave traces in the battery and reduce the battery capacity. This phenomenon is called the battery memory effect.
Erase memory
The method is to completely discharge the battery and then recharge it. Discharge can use a discharger or a charger with discharge function, or use the standby mode of the mobile phone. If you want to speed up the discharge, you can turn on the lights of the display and the phone buttons. To ensure that the battery can be fully charged again, you should control the time according to the instructions of the manual, and repeat the charge and discharge two to three times.
Battery storage
Lithium batteries can be stored in a clean, dry and ventilated room with an ambient temperature of -5°C-35°C and a relative humidity of not more than 75%. Avoid contact with corrosive substances and keep away from fire and heat sources. The battery power remains 30% to 50% of the nominal capacity. It is recommended to charge the stored battery every 6 months.
Optional battery
1. Purchase battery products with "National Inspection Exemption" and "China Famous Brand" logos and local famous brand battery products. The quality of these products is guaranteed.
2. According to the requirements of electrical appliances, select the applicable battery type and size, and according to the size and characteristics of electrical power consumption, purchase batteries suitable for electrical appliances.
3. Pay attention to check the production date and shelf life of the battery, buy a battery (new battery), the performance of the new battery is good.
4. Pay attention to the appearance of the battery. You should choose a battery with exquisite packaging, neat and clean appearance, and no signs of leakage.
5. Pay attention to the logo of the battery. The battery trademark should indicate the manufacturer's name, battery polarity, battery model, nominal voltage, trademark, etc.; on the sales package (such as 2 heat shrinkable or 4 heat shrinkable, or tag hanging card) There should be the Chinese factory address, production date and shelf life or indicate the deadline of shelf life, and the number of the implementation standard (generally the national standard GB/T××××-××××). Do not buy products that do not have a Chinese factory name, a production date and a shelf life, or the deadline for the shelf life, and no implementation standards. When buying alkaline zinc-manganese batteries, look at the model number for ALKALINE or LR.
6. Because the mercury in the battery is harmful to the environment, in order to protect the environment, you should choose batteries with the words "No Mercury", "0% Mercury", and "No Mercury" on the trademark when purchasing.
Hi,We provide motorcycle battery products. If you are interested in motorcycle battery, please contact us for more information.
Normal charging
Different batteries have their own characteristics, and users must charge them according to the method indicated in the manufacturer's manual. In the standby state, the phone also consumes the battery. If fast charging is required, it is advisable to turn off the phone or remove the battery for charging.
fast charging
Some automated smart fast chargers only indicate that they are 90% full when the indicator signal changes, and the charger will automatically switch to slow charging to fully charge the battery. It is best for users to fully charge the battery before use, otherwise it will shorten the use time.
Memory effect
If the battery is a nickel-cadmium battery, if it is not fully charged or discharged for a long time, it will leave traces in the battery and reduce the battery capacity. This phenomenon is called the battery memory effect.
Erase memory
The method is to completely discharge the battery and then recharge it. Discharge can use a discharger or a charger with discharge function, or use the standby mode of the mobile phone. If you want to speed up the discharge, you can turn on the lights of the display and the phone buttons. To ensure that the battery can be fully charged again, you should control the time according to the instructions of the manual, and repeat the charge and discharge two to three times.
Battery storage
Lithium batteries can be stored in a clean, dry and ventilated room with an ambient temperature of -5°C-35°C and a relative humidity of not more than 75%. Avoid contact with corrosive substances and keep away from fire and heat sources. The battery power remains 30% to 50% of the nominal capacity. It is recommended to charge the stored battery every 6 months.
Optional battery
1. Purchase battery products with "National Inspection Exemption" and "China Famous Brand" logos and local famous brand battery products. The quality of these products is guaranteed.
2. According to the requirements of electrical appliances, select the applicable battery type and size, and according to the size and characteristics of electrical power consumption, purchase batteries suitable for electrical appliances.
3. Pay attention to check the production date and shelf life of the battery, buy a battery (new battery), the performance of the new battery is good.
4. Pay attention to the appearance of the battery. You should choose a battery with exquisite packaging, neat and clean appearance, and no signs of leakage.
5. Pay attention to the logo of the battery. The battery trademark should indicate the manufacturer's name, battery polarity, battery model, nominal voltage, trademark, etc.; on the sales package (such as 2 heat shrinkable or 4 heat shrinkable, or tag hanging card) There should be the Chinese factory address, production date and shelf life or indicate the deadline of shelf life, and the number of the implementation standard (generally the national standard GB/T××××-××××). Do not buy products that do not have a Chinese factory name, a production date and a shelf life, or the deadline for the shelf life, and no implementation standards. When buying alkaline zinc-manganese batteries, look at the model number for ALKALINE or LR.
6. Because the mercury in the battery is harmful to the environment, in order to protect the environment, you should choose batteries with the words "No Mercury", "0% Mercury", and "No Mercury" on the trademark when purchasing.
Hi,We provide motorcycle battery products. If you are interested in motorcycle battery, please contact us for more information.
